Download Instructions Here

It will NOT reprogram the remote facility on a newly supplied key or second hand from another vehicle. Sit in the car with doors closed. Place the key into the ignition and turn to Pos II (lights on) 2. Now press the lock button on the key remote with the key still in the ignition for about 2 secs. How to program a remote key for your car? How to program the key fob remote control, or programmable key for your vehicle?The answers to these questions can be found in the below list of vehicles. All provided by us instructions are tried and tested. OP-COM is a Windows based diagnostic program package for Opel / Vauxhall cars. The diagnostic program package covers a wide range of cars from 1990-2017, latest models are also included! Main functions are read and clear fault codes, display live data, perform output tests. Immobiliser support, remote and key fob programming. Before using OP COM China Clone to make key for your Astra, 4 things you need to know in advance. NEW remote central locking board (PCB) to the car 2. A key to the car 3. The Security Pass for the car 4. Opcom OP-Com 2012V with Firmware V1.59 OPCOM How to install Opcom firmware 1.59 (the following video link is offered for your reference). Before using OPCOM to make key for your Astra, 4 things you need to know in advance. NEW remote central locking board (PCB) to the car 2. A key to the car 3. The Security Pass for the car 4. Opcom OP-Com 2012V with Firmware V1.59 OPCOM. How to install Opcom firmware 1.59 (the following video link is offered for your reference).

Hood Pin Equipped Vehicles

1. Press and hold the hood-pin for 4 seconds
   What is a hood-pin?
   
2. Release the hood-pin (the parking lights will turn on)
   What are parking lights?


3. While the parking lights are on, press the hood-pin once more and release immediately
4. The parking lights will now stay on for up to 20 seconds
5. Before the parking lights go out, turn the ignition key ON (RUN Position) and immediately to the OFF position
6. Press and HOLD the LOCK button of the key fob you are trying to program and keep it held down until the parking lights flash 5 times quickly (may be followed by 2 slow flashes, not all the time though)
7. The key fob has now been stored to memory

If you have additional key fobs to program, repeat step 5 and 6 at this time. *Systems can hold a maximum of 4 remotes

Here is a YouTube video we have made to assist with programming:

NO HOOD PIN? How To Program

Option 1: (if the antenna on your windshield HAS an Antenna Programming Assistance Button (A.P.A.B.)

1. Make sure the hood is closed
2. Turn the ignition key to the IGNITION ON (RUN) position
3. Within 5 seconds, press the programming button on the antenna twice for 1 second each time. THE LED WILL COME ON SOLID.
4. You now have 20 seconds to select one of the sub-menus (proceed with transmitter programming procedure below:

Note: To exit programming mode, press on the antenna button once (the LED will come ON) and release.

Transmitter Programming Programming Procedure

1. Before the lights go out, turn the ignition key to the Ignition Off position, then to On (Run) position and immediately to the OFF position. OFF/ON/OFF
2. Press and hold the LOCK button and keep it down until the parking lights flash 5 times quickly. The transmitter has been stored to memory AFTER the 5 flashes, meaning programming is completed.

You must repeat the above process to add additional transmitters.

Option 2: (If the A.P.A.B. button is not present on the antenna)

Here is a YouTube video we have made to assist with programming if your vehicle does NOT have a hood pin:

Wondering what a hood pin is, or where it is located?

Need to purchase a hood pin?

Download Instructions

Corsa C Key Fob Programming Opcom

Hood Pin Equipped Vehicles

1. Press and hold the hood-pin for 4 seconds
   What is a hood-pin?
   
2. Release the hood-pin (the parking lights will turn on)
   What are parking lights?


3. While the parking lights are on, press the hood-pin once more and release immediately
4. The parking lights will now stay on for up to 20 seconds
5. Before the parking lights go out, turn the ignition key ON (RUN Position) and immediately to the OFF position
6. Press and HOLD the LOCK button of the key fob you are trying to program and keep it held down until the parking lights flash 5 times quickly (may be followed by 2 slow flashes, not all the time though)
7. The key fob has now been stored to memory

If you have additional key fobs to program, repeat step 5 and 6 at this time. *Systems can hold a maximum of 4 remotes

Here is a YouTube video we have made to assist with programming:

Opcom Key Fob Programming Fob

NO HOOD PIN? How To Program

Option 1: (if the antenna on your windshield HAS an Antenna Programming Assistance Button (A.P.A.B.)

1. Make sure the hood is closed
2. Turn the ignition key to the IGNITION ON (RUN) position
3. Within 5 seconds, press the programming button on the antenna twice for 1 second each time. THE LED WILL COME ON SOLID.
4. You now have 20 seconds to select one of the sub-menus (proceed with transmitter programming procedure below:

Note: To exit programming mode, press on the antenna button once (the LED will come ON) and release.

Transmitter Programming Programming Procedure

1. Before the lights go out, turn the ignition key to the Ignition Off position, then to On (Run) position and immediately to the OFF position. OFF/ON/OFF
2. Press and hold the LOCK button and keep it down until the parking lights flash 5 times quickly. The transmitter has been stored to memory AFTER the 5 flashes, meaning programming is completed.

You must repeat the above process to add additional transmitters.

Option 2: (If the A.P.A.B. button is not present on the antenna)

Opcom Key Fob Programming Entry

Here is a YouTube video we have made to assist with programming if your vehicle does NOT have a hood pin:

Wondering what a hood pin is, or where it is located?

Need to purchase a hood pin?